Close and reopen Proteus ISIS.
void loop() if(millis() - oldTime > 1000) //every 1 second detachInterrupt(0); flowRate = (pulseCount / 7.5); // Liters per minute lcd.setCursor(0,0); lcd.print("Flow: "); lcd.print(flowRate); lcd.print(" L/min "); pulseCount = 0; oldTime = millis(); attachInterrupt(digitalPinToInterrupt(2), pulseCounter, RISING); yfs201 proteus library exclusive
By: Embedded Electronics Expert Team Published: October 2023 | Updated for Latest Proteus 8/9 Versions
void pulseCounter() pulseCount++;
yfs201 proteus library exclusive, YFS201 simulation, Proteus flow sensor model, water flow sensor Proteus. Close and reopen Proteus ISIS
In the world of embedded systems and simulation, (from Labcenter Electronics) remains the gold standard for circuit design, PCB layout, and virtual microcontroller testing. However, one of the biggest headaches for hobbyists and professionals alike is the lack of ready-to-use simulation models for specific sensors—like the popular YFS201 Hall-Effect Water Flow Sensor .
void setup() pinMode(2, INPUT_PULLUP); attachInterrupt(digitalPinToInterrupt(2), pulseCounter, RISING); lcd.begin(16,2); oldTime = millis();
If you have typed into a search engine, you are likely tired of broken links, manual modelling errors, or spending hours trying to simulate a water flow system with an Arduino or PIC. Today, we end that search. This article provides an exclusive, deep-dive guide into the YFS201 library for Proteus, including how to install it, how it works, and how to simulate a complete water flow monitoring system. Part 1: What is the YFS201 Sensor? (And Why Simulate It?) Before we discuss the library, we must understand the hardware. However, one of the biggest headaches for hobbyists