Bc901h Manual - Tgc

Remember that while this article mirrors the official manual for most BC901H versions, always defer to the printed safety labels on your specific unit. If you encounter a persistent problem not covered here, reach out to TGC’s technical support with your error code and serial number.

To change: Use ▲/▼ to select parameter, press , adjust value, press SET to store. Exit by pressing MENU repeatedly. ⚠️ Changing F01 (differential) to too low a value can short-cycle your compressor. TGC recommends keeping it at 1°F for residential HVAC. Section 6: Troubleshooting Common Error Codes (TGC BC901H) When something goes wrong, the unit displays a code. Here’s what they mean, per the manual. tgc bc901h manual

| Terminal | Label | Connection | |----------|-------|-------------| | 1 | L (Line) | 24V AC Hot (or 110V AC Live) | | 2 | N (Neutral) | 24V AC Common (or Neutral) | | 3 | COM | Common for sensor or relay | | 4 | NO | Normally Open relay output | | 5 | NC | Normally Closed relay output | | 6 | S1 | Temperature sensor 1 (positive) | | 7 | S2 | Temperature sensor 1 (negative) | Remember that while this article mirrors the official

✅ Safely install and wire the device. ✅ Program daily and weekly schedules. ✅ Troubleshoot common errors (E1, E2, E5). ✅ Access advanced parameters for fine-tuning. ✅ Perform maintenance and (if applicable) firmware updates. Exit by pressing MENU repeatedly