Technicolor — Td5336 Manual

| LED Label | Color & State | Meaning | |-----------|---------------|---------| | | Solid Green | Device on, normal operation | | | Solid Red | Boot failure or hardware error | | | Blinking Green | Firmware upgrade in progress (do NOT unplug) | | DSL | Solid Green | DSL line synchronized (connected to ISP) | | | Blinking Green | Training / attempting to sync | | | Off | No DSL cable or line dead | | Internet | Solid Green | IP obtained (connected to internet) | | | Blinking Green | Data activity | | | Solid Orange | No IP / PPPoE authentication failure | | | Off | No internet or modem in bridge mode | | LAN 1–4 | Solid Green | Device connected at gigabit speed | | | Solid Orange | Device connected at 10/100Mbps | | | Blinking | Data transfer | | Wi‑Fi 2.4G | Solid Green | 2.4GHz radio on | | | Blinking | Wireless activity | | Wi‑Fi 5G | Solid Green | 5GHz radio on | | | Off | 5GHz disabled (common after factory reset? Check config) | | WPS | Blinking Green | WPS pairing active | | | Solid Green for 5 sec then off | Pairing successful | | | Blinking rapidly | Error / timeout | | USB | Solid Green | USB device detected | | | Blinking | Data access |

power off the router during a firmware update – it will brick the device. Chapter 10: Common Problems & Fixes (Troubleshooting) This is the section that should have been in the original manual. Technicolor Td5336 Manual

Keep this link safe, and consider printing the troubleshooting chart (Chapter 3 & 10) to tape next to your router. Technicolor TD5336 Manual, TD5336 setup, TD5336 troubleshooting, Technicolor router guide, TD5336 advanced settings, VDSL router manual, bridge mode, default password, factory reset, Wi‑Fi 5GHz. | LED Label | Color & State |