PaintTool SAI Development Room
|
A serious bug "While saving a canvas, in rare cases the saved file may be lost if another program accesses the saving file." is dicovered in Ver.1.2.5 and earler verions.
As we have not received any reports of this bug to date, we believe that the occurrence rate is low, but we cannot deny the possibility that your valuable works will be lost, so we released the corrected version as a test version.
|
This is a technical preview version of SAI Ver.2.
Please remember this version will includes some bugs and inconveniences because this version is under development.
Please do not use this version if you want to use stable version.
And, this version requires basic skills for Windows operation.
Please never use this version if you have not basic skills for Windows operation.
If your USB drive contains a controller manufactured by , you need one tool: the Skymedi USB Drive Format Tool . But simply formatting isn't enough. To achieve Extra Quality —meaning a full, error-free, deep-level restoration—you must use advanced parameters.
The is not just a formatter; it is a microcontroller-level diagnostic suite. It re-maps bad blocks, verifies every sector, and extends the life of your drive by up to 200%.
By: Tech Recovery Team | Updated: May 2026
| Error Message | Meaning | Solution | | :--- | :--- | :--- | | "Bad Block too many" | NAND is seriously degraded | Reduce the "Allowable Bad Block" count from 10 to 20. This reduces capacity but saves the drive. | | "Compare Error at LBA 0x..." | Physical sector damage | Run the extra quality format again. If it fails at the same LBA, the drive is dying. | | "Controller not matched" | Your drive is not Skymedi | Find the correct tool (Alcor, Phison, SMI). | | "Format stuck at 99%" | Firmware issue | Short two pins on the PCB (emergency reset) OR use the "Factory Driver" mode in the tool settings. | To illustrate why "Extra Quality" matters, here is a real-world test on a 32GB Skymedi SK6211 drive that previously showed "RAW file system."
Abstract of Available Features
Skymedi Usb Drive Format Tool Extra Quality [ESSENTIAL WALKTHROUGH]
If your USB drive contains a controller manufactured by , you need one tool: the Skymedi USB Drive Format Tool . But simply formatting isn't enough. To achieve Extra Quality —meaning a full, error-free, deep-level restoration—you must use advanced parameters.
The is not just a formatter; it is a microcontroller-level diagnostic suite. It re-maps bad blocks, verifies every sector, and extends the life of your drive by up to 200%. skymedi usb drive format tool extra quality
By: Tech Recovery Team | Updated: May 2026 If your USB drive contains a controller manufactured
| Error Message | Meaning | Solution | | :--- | :--- | :--- | | "Bad Block too many" | NAND is seriously degraded | Reduce the "Allowable Bad Block" count from 10 to 20. This reduces capacity but saves the drive. | | "Compare Error at LBA 0x..." | Physical sector damage | Run the extra quality format again. If it fails at the same LBA, the drive is dying. | | "Controller not matched" | Your drive is not Skymedi | Find the correct tool (Alcor, Phison, SMI). | | "Format stuck at 99%" | Firmware issue | Short two pins on the PCB (emergency reset) OR use the "Factory Driver" mode in the tool settings. | To illustrate why "Extra Quality" matters, here is a real-world test on a 32GB Skymedi SK6211 drive that previously showed "RAW file system." The is not just a formatter; it is
About Features Request
I will read all emails of features request but I will not be able to reply to all request emails because I am one man team for development and customer support.
Thank you for your understanding.
- Koji Komatsu - Programmer, President
|
This site is designed for Microsoft Edge 79, Firefox 34, Chrome 37, Safari 7, Opera 24,
and requires a display environment of 1024x768 32bit true color or higher.
Please do not use materials on this site without permission.
|
|
