Day Watching 18 Install - Fu10

Set gain to 0-6dB (no higher, or noise appears). Iris should be manual: F5.6 to F8.0 for deep depth of field.

Mount the FU10 2.5–3 meters high. For day watching, tilt the camera 15–20 degrees downward to avoid direct horizon glare during 10 AM–2 PM peak sun. fu10 day watching 18 install

Format the microSD card (min 128GB, U3 class). Allocate 70% to continuous recording, 30% to motion events. Set gain to 0-6dB (no higher, or noise appears)

Walk across the frame. Check for artifacting. If present, reduce sharpness from 8 to 4 (default 8 is too aggressive for day watching). Phase 4: Recording & Final Verification (Steps 15-18) Step 15: Set Recording Schedule Under Record > Schedule , create a “Day Watching” block: 6:00 AM to 6:00 PM. Choose H.265 codec at 30 fps, 4 MP resolution. For day watching, tilt the camera 15–20 degrees

A: Approximately 45–60 minutes for a single camera. Expect 3 hours for an 8-camera system.