Arduino Sensor Shield V5 0 Manual Info

This manual will serve as your complete reference guide. We will cover the hardware overview, the pin-by-pin breakdown, power management, common troubleshooting issues, and a step-by-step example project. The Sensor Shield V5.0 is a passive expansion board designed specifically for the Arduino Uno R3 (as well as the Arduino Leonardo and similar form factors). It sits directly on top of your Arduino, stacking via the standard headers.

The reset button on the shield should align perfectly with the reset button on the Arduino. The USB port on the Arduino should stick out the "short side" of the shield. arduino sensor shield v5 0 manual

#include <Servo.h> Servo myservo; const int trigPin = 8; const int echoPin = 9; int pos = 0; This manual will serve as your complete reference guide